2005 FORD EXPLORER
Install by "Brad's
Custom Auto" Located in Seattle, Washington
Link to "Brad's Custom Auto"
Note's
1) This Explorer has
a Drive by-wire throttle-body
2) EGR connection is
on the passenger side
3) Ranger water neck
on it
4) EGR we extended
the wires
5) welded the flange
to get the throttle body location
6) The Explorer
throttle body has a different bolt spacing too So we had to re-drill
thread the new holes with heli coils That way we could us the factory
bolts
7) We also changed
the fuel system around. We didn't use the supplied fuel block. We used a T
& fittings that connected to the factory lines
8) We used 39lbs
injectors
9) customer also had
the blower ported
|